Technology of Simple Structure, Long Durability
F2030-k utilizes the laser diffraction measurement method, which is renowned for its straightforward design and exceptional accuracy. The device lacks a motor, making maintenance effortless.
Its small size and uncomplicated structure further simplify upkeep.
With a measurement repeatability of ±0.2 µm, the F2030-k is highly adaptable and suitable for diverse materials including electric wire and cable, steel wire, enamelled copper wire,medical tubing, and 3D filament, irrespective of their transparency.
Single axis sampling frequency of 10KHz
Sampling frequency can reach to 10KHz due to no motor running speed limitation,which enables to get more information of the object under measurement.
Applications
Touch Screen,Computer,Cellphone
DALA F2030-K can be managed by computer ,cellphone and Touch screen,like parameter setting ,measurement data management ,
and so on,customers can choose as their application request.
Technical Specification
| Model | F2030-K |
| Axis | 2-axis |
| Measurement data | diameter and ovality, lump and necks |
| Frequency | 10KHz(5KHz/axis) |
| Measurement range | 0.5~30mm |
| Repeatability(1) | ±0.2μm |
| Accuracy(2) | ±(0.001+0.01%*D)mm |
| Min defect height | 0.01mm |
| Min defect length(3) | 0.4mm(wire speed120m/min)
1.6mm(wire speed500m/min) |
| Size | 280*245*58mm |
| Working power source | 24V ±10% 40VA |
| Running temperature | 5℃~50℃ |
| Display | LED display |
| Commuincation port | Standard:WIFI,RS485 MODBUS RTU,CAN
Option:PROFIBUS,PROFINET, EtherNet/IP,EtherCAT |
| Electrical port | Standard: digital output(relay),digital input,analog input,encoder pulse input port
Option:PI feedback control (4) |
| Data colletion & analysis | available (option DS14 ZT display and control system,DMS1000) |
| Out-of-tolerance alarm | available |
| Transparent mode | available |
Note:
(1) set sliding window as 100ms, outside diameter repeatability of φ1mm round rod at measurement center area
(2) set sliding window as 100ms, outside diameter deviation of φ1mm round rod at measurement area
(3)set defect measurement average time as 0ms, the minimum defect length which cannot be missed at the measurable area
(4)PI feedback control is option, but must order at placing order
